Skip to main content

Parts Quote

Select the parts you need below by entering the quantity required for a quick quote.  We use only Air Seeder Parts LLC parts for most parts listed here.  Someone will be in touch with you shortly.

Prices are subject to change. Parts Quote are valid for 10 days upon receipt.

Step 1 of 2

Hidden

PRICE ESTIMATE

To accept payments on this form you will need to install one of our payment add-ons. To learn more about your payment add-on options, visit the following page (https://www.gravityforms.com/blog/payment-add-ons). Important: Delete this tip before you publish the form.
Price: $7.00
Price: $7.00
50% increase in wear surface. Pin end includes 1/2" ratchet opening for rotation. 1/2" shoulder added to bushing to increase surface area.Timing index marks aid in rotating tracking. Replaces John Deere Part Numbers: N282536 (Main Pin), N283636 (Bushings)and N216568 (Thrust Washer). A-ASPMAIN
Price: $63.56
1/3 increase in wear surface. O-Ring inside of bushing holds grease in, keeps dirt out. Spiraled grease groove includes bleed-off hole to indicate when fully greased. Wider bushing for arm side with heavier load. Built to handle quick and easy installation. Bolt, nut, and washer included. John Deere 60 and 90 Series. A-FWPIVOT
Price: $58.17
1/3 increase in wear surface. O-Ring inside of bushing holds grease in, keeps dirt out. Spiraled grease groove includes bleed-off hole to indicate when fully greased. Wider bushing for arm side with heavier load. Built to handle quick and easy installation. Bolt, nut, and washer included John Deere 60 and 90 Series. A-CWPIVOT
Price: $62.17
Thicker gauge and 50% larger slot increase life by nearly doubling the wear surface. Pins on handle 50% larger in diameter to increase wear life. Handle 50% larger for ease of adjustment. Hole in handle allows 3/8” socket to fit for installation. Includes spring and nylock nut. Replaces John Deere Part Numbers: N283120 & NN282710 Equipment Models: John Deere 60, 90 and ProSeries A-ADJBRKH
Price: $43.19
Price: $43.19
Price: $50.00
Price: $47.00
Price: $175.00
Price: $175.00
Price: $49.18
Price: $55.66
Price: $45.58
Price: $45.58
Price: $45.18
Price: $130.00
Moves worn seed boot back to original position. No drilling required. Can be installed without disassembling row unit. Left & Rights Available. Includes Seed Tab Bolt. Equipment Models: John Deere 90 Series. A-ASPBRKL
Price: $25.42
Moves worn seed boot back to original position. No drilling required. Can be installed without disassembling row unit. Left & Rights Available. Includes Seed Tab Bolt. Equipment Models: John Deere 90 Series. A-ASPBRKR
Price: $25.42
The BOSS 2.0 Stainless Steel Meter Housing is a replacement for John Deere ground drive meter housings on 1900, 1910, C650, and C850 air carts. The BOSS 2.0 Stainless Steel Meter Housing is hydraulic drive compatible with the addition of the Hydraulic Bracket Kit – Sold separately. A-BOSS20
Price: $6,254.19
The BOSS 2.0 SC Stainless Steel Meter Housing is a replacement for John Deere SectionCommand™ meter housings on 1910, C650, and C850 air carts. A-BOSS20SC
Price: $7,752.54
The Transition Kit is a replacement kit for 1900 & 1910 John Deere air carts. Early 1900 carts with angled ladder tubes will require Transition Extensions. The Transition Kit is not compatible with the 550 BU tank. For 550 BU tanks, purchase the 550 BU Transition Kit. A-TRANS415KIT
Price: $962.54
The Single Shoot Manifold Kit includes all necessary stainless steel parts, gaskets & hardware to replace John Deere’s 1900 & 1910 single shoot manifolds. A-SSHOOTKIT
Price: $1,991.91
The Tank Pressure Kit – Tank Style includes all necessary fittings & hose clamps to run the tank pressurization through the side of the tank – For Use With BOSS Meter Housings Only. Includes: Tank Pressure Vent (1), Tank Pressure Entrance (1), 1” Tee Barb (1), 3/4” Hose Clamps (7) A-TPKIT100
Price: $79.89
The 90° Tower is a stainless steel replacement for John Deere mild-steel manifold towers on 1910 & C850 air carts. A-ASPTOWER
Price: $189.92
The Cover Saver provides protection for new and used John Deere secondary tower covers. Twist Lock & Lid are sold separately – Purchase from OEM Manufacturer. A-CVRSVR100
Price: $39.85
The 550 BU Transition Kit is a replacement for 1910 John Deere [550 BU Center Tank], C650, and C850 air carts. A-TRANS550KIT
Price: $1,056.79
2.5″ stainless steel hose clamp for use on all tubing. A-CLAMP230
Price: $0.00
Stainless Steel Construction Includes 2 Gaskets. The Plenum Air Equalizer is designed to lift the air into the middle of the plenum and disperse the air equally into all of the tubes. A-PLEQUAL
Price: $439.11
Price: $20.15
Price: $69.87
Price: $76.04
Price: $63.10
Price: $65.04
Price: $88.38
Price: $90.31
Price: $99.08
Price: $101.02
Price: $196.78
Price: $200.66
Price: $231.79
Price: $235.68
Price: $285.44
Externally Mounted Greaseable Bearings Replacement for 350, 430 & 550 Bushel Carts Must Reuse Orbit Motor & Control Valve from Original Conveyor Pre-Installed: Self-Cleaning Lower Roller & Solid Neoprene Upper Roller
Price: $14,935.76
Price: $2.50
Price: $5.00
Price: $7.90
The 2-Port Connection Tank to Tool is a cast stainless steel replacement for John Deere couplings on 1900 & 1910 air carts with 2-1/2″ tubing. A-CONNECT225
Price: $329.24
The 3-Port Connection Tank to Tool is a stainless steel replacement for John Deere couplings on 1900 & 1910 air carts with 2-1/2″ tubing. A-CONNECT300
Price: $410.23
The 2-Port Connection Tank to Tool is a cast stainless steel replacement for John Deere couplings on 1900 & 1910 air carts with 3″ tubing A-CONNECT230
Price: $356.39
1-10 LB per Acre great for Small Seeds The CONTINU-RATE® Meter Roller’s spiraled design provides a steady, continual flow of product, eliminating pulsation. The Meter Roller comes complete with inserts, bearings & snap rings. The CONTINU-RATE® METER ROLLER – WHITE is for use with the John Deere Non-SectionCommand™ & SectionCommand™ Systems – Compatible with 1900, 1910, C650, and C850 John Deere air carts. It is a low-rate meter roller – 1/2 rate of the CONTINU-RATE™ Yellow Meter Roller. The CONTINU-RATE® Meter Roller – WHITE is designed for the use with the CONTINU-RATE® Tuning Ring – WHITE – Sold Separately.
Price: $89.19
The CONTINU-RATE® METER ROLLER – YELLOW is for use with the John Deere Non-SectionCommand™ & SectionCommand™ Systems – Compatible with 1900, 1910, C650, and C850 John Deere air carts. It is a low-rate meter roller – 10-20 lb./acre. The CONTINU-RATE® Meter Roller – YELLOW is designed for the use with the CONTINU-RATE® Tuning Ring – YELLOW – Sold Separately
Price: $85.30
The CONTINU-RATE® Meter Roller’s spiraled design provides a steady, continual flow of product, eliminating pulsation. The Meter Roller comes complete with inserts, bearings & snap rings. The CONTINU-RATE® METER ROLLER – BLACK is for use with the John Deere Non-SectionCommand™ & SectionCommand™ Systems – Compatible with 1900, 1910, C-650, and C-850 John Deere air carts. It is a medium-rate meter roller – 20-130 lb./acre. The CONTINU-RATE® Meter Roller – BLACK is designed for the use with the CONTINU-RATE® Tuning Ring – BLACK – Sold Separately.
Price: $85.30
The CONTINU-RATE® Meter Roller’s spiraled design provides a steady, continual flow of product, eliminating pulsation. The Meter Roller comes complete with inserts, bearings & snap rings. The CONTINU-RATE® METER ROLLER – GREEN is for use with the John Deere Non-SectionCommand™ & SectionCommand™ Systems – Compatible with 1900, 1910, C650, and C850 John Deere air carts. It is a high-rate meter roller – 30-220 lb./acre. The CONTINU-RATE® Meter Roller – GREEN is designed for the use with the CONTINU-RATE® Tuning Ring – GREEN – Sold Separately.
Price: $85.30
The CONTINU-RATE® Meter Roller’s spiraled design provides a steady, continual flow of product, eliminating pulsation. The Meter Roller comes complete with inserts, bearings & snap rings. The CONTINU-RATE® METER ROLLER – ORANGE is for use with the John Deere Non-SectionCommand™ & SectionCommand™ Systems – Compatible with 1900, 1910, C650, and C850 John Deere air carts. It is designed for large seeds – 50-180 lb./acre. The CONTINU-RATE® Meter Roller – ORANGE is designed for the use with the CONTINU-RATE® Tuning Ring – ORANGE – Sold Separately.
Price: $85.30
The CONTINU-RATE® Meter Roller’s spiraled design provides a steady, continual flow of product, eliminating pulsation. The Meter Roller comes complete with inserts, bearings & snap rings. The CONTINU-RATE® METER ROLLER – BLUE is for use with the John Deere Non-SectionCommand™ & SectionCommand™ Systems – Compatible with 1900, 1910, C650, and C850 John Deere air carts. It is high-rate Meter Roller – 50-265 lb./acre. The CONTINU-RATE® Meter Roller – BLUE is designed for the use with the CONTINU-RATE® Tuning Ring – BLUE – Sold Separately.
Price: $85.30
The CONTINU-RATE® Tuning Ring is not compatible with John Deere Meter Rollers – For use with CONTINU-RATE® METER ROLLER – BLUE.
Price: $8.31
The CONTINU-RATE® Tuning Ring is not compatible with John Deere Meter Rollers – For use with CONTINU-RATE® METER ROLLER – WHITE.
Price: $8.33
The CONTINU-RATE® Tuning Ring is not compatible with John Deere Meter Rollers – For use with CONTINU-RATE® METER ROLLER – BLACK.
Price: $8.31
The CONTINU-RATE® Tuning Ring is not compatible with John Deere Meter Rollers – For use with CONTINU-RATE® METER ROLLER – GREEN.
Price: $8.31
The CONTINU-RATE® Tuning Ring is not compatible with John Deere Meter Rollers – For use with CONTINU-RATE® METER ROLLER – ORANGE.
Price: $8.31
The CONTINU-RATE® Tuning Ring is not compatible with John Deere Meter Rollers – For use with CONTINU-RATE® METER ROLLER – YELLOW.
Price: $8.31
Price: $54.55
Call for Pricing
Price: $0.00
The Air Seeder Parts Double Agitator was created to fix the bridging of product flow where the tank transitions to the meter. Our Double Agitator reduces the bridging of product and keeps it moving at a continuous rate through this transition.
Price: $487.68
The Air Seeder Parts Seed Tubes are manufactured out of stainless steel—including an all-stainless steel hose clamp—to virtually eliminate corrosion. The seed tube has a cut-out window near the top of the tube that’s wide enough for the stainless steel hose clamp to grip the hose, securing it inside the tube. Now, a screwdriver to loosen the hose clamp is all you need to disconnect, and reconnect, with no damage to the tube. The OEM seed tubes are made of a mild steel material causing corrosion and are designed with three barbs at the top of the tube as a method of firmly gripping and holding the hose inside. These barbs make it extremely difficult to remove, inspect, reinstall, or replace the hose without doing extensive damage to the end of the hose. Air Seeder Parts Seed Tubes come in Left, Straight, and Right configurations, sold separately. Each Seed Tube comes with an all-stainless steel hose clamp.
Price: $48.54
The Air Seeder Parts Seed Tubes are manufactured out of stainless steel—including an all-stainless steel hose clamp—to virtually eliminate corrosion. The seed tube has a cut-out window near the top of the tube that’s wide enough for the stainless steel hose clamp to grip the hose, securing it inside the tube. Now, a screwdriver to loosen the hose clamp is all you need to disconnect, and reconnect, with no damage to the tube. The OEM seed tubes are made of a mild steel material causing corrosion and are designed with three barbs at the top of the tube as a method of firmly gripping and holding the hose inside. These barbs make it extremely difficult to remove, inspect, reinstall, or replace the hose without doing extensive damage to the end of the hose. Air Seeder Parts Seed Tubes come in Left, Straight, and Right configurations, sold separately. Each Seed Tube comes with an all-stainless steel hose clamp.
Price: $48.54
The Air Seeder Parts Seed Tubes are manufactured out of stainless steel—including an all-stainless steel hose clamp—to virtually eliminate corrosion. The seed tube has a cut-out window near the top of the tube that’s wide enough for the stainless steel hose clamp to grip the hose, securing it inside the tube. Now, a screwdriver to loosen the hose clamp is all you need to disconnect, and reconnect, with no damage to the tube. The OEM seed tubes are made of a mild steel material causing corrosion and are designed with three barbs at the top of the tube as a method of firmly gripping and holding the hose inside. These barbs make it extremely difficult to remove, inspect, reinstall, or replace the hose without doing extensive damage to the end of the hose. Air Seeder Parts Seed Tubes come in Left, Straight, and Right configurations, sold separately. Each Seed Tube comes with an all-stainless steel hose clamp.
Price: $48.54
Air Seeder Parts’ TRU-Metering Inserts reduce the space between the meter roller and the insert inside the meter cartridge, only allowing the product within the flutes to meter through the cartridge. Our TRU-Metering Insert closes that gap, eliminating the issue of product siphoning, especially with small seeds and fine products. Now, we’re truly metering. The TRU-Metering Insert—Solid is for use with meter rollers that do not have tuning rings installed. The inserts are compatible with CONTINU-RATE® and OEM meter rollers.
Price: $48.95
Air Seeder Parts’ TRU-Metering Inserts reduce the space between the meter roller and the insert inside the meter cartridge, only allowing the product within the flutes to meter through the cartridge. Our TRU-Metering Insert closes that gap, eliminating the issue of product siphoning, especially with small seeds and fine products. Now, we’re truly metering. The TRU-Metering Insert—1 Ring is for use with meter rollers that have 1 tuning ring installed. The inserts are compatible with CONTINU-RATE® and OEM meter rollers.
Price: $48.95
Air Seeder Parts’ TRU-Metering Inserts reduce the space between the meter roller and the insert inside the meter cartridge, only allowing the product within the flutes to meter through the cartridge. Our TRU-Metering Insert closes that gap, eliminating the issue of product siphoning, especially with small seeds and fine products. Now, we’re truly metering. The TRU-Metering Insert—1 Ring is for use with meter rollers that have 1 tuning ring installed. The inserts are compatible with CONTINU-RATE® and OEM meter rollers.
Price: $48.95
Air Seeder Parts’ TRU-Metering Inserts reduce the space between the meter roller and the insert inside the meter cartridge, only allowing the product within the flutes to meter through the cartridge. Our TRU-Metering Insert closes that gap, eliminating the issue of product siphoning, especially with small seeds and fine products. Now, we’re truly metering. The TRU-Metering Insert—1 Ring is for use with meter rollers that have 1 tuning ring installed. The inserts are compatible with CONTINU-RATE® and OEM meter rollers.
Price: $48.95
I would like an additional quote for labor.